EGR Temperature Sensor
Air Flow MeterTorque value 1.2 - 1.8 N-m (0.12 - 0.18 kg/m, 0.9 - 1.3 ft.lbs.) [1]
Crank Angle Sensor
Torque value 4.9 - 5.9 N-m (0.5 - 0.6 kg/m, 3.6 - 4.3 ft.lbs.) [1]
EGR Temperature Sensor
Torque value 15 - 25 N-m (1.5 - 2.5 kg/m, 11 - 18 ft.lbs.)
Fuel Injector Cover
Torque value 2.0 - 3.4 N-m (0.20 - 0.35 kg/m, 1.4 - 2.5 ft.lbs.) [1]
Idle Switch/Throttle Sensor
Torque value 3.8 - 5.1 N-m (0.38 - 0.51 kg/m, 2.8 - 3.8 ft.lbs.) [1]
Idle-Up Solenoid Valve
Torque value 18 -29 N-m (1.8 - 2.9 kg/m, 13 - 22 ft.lbs.)
O2 Sensor
Torque value 18 - 24 N-m (1.8 - 2.4 kg/m, 13 - 17 ft.lbs.)
Throttle Body
Torque value 12 -18 N-m (1.2 - 1.8 kg/m, 9 -13 ft.lbs.) [1]
Water Temperature Sensor
Torque value 20 - 29 N-m (2.0 - 2.9 kg/m, 14 - 22 ft.lbs.)
Air Fuel Mixture
CO content at idle 0.2 - 5.0% [2]
Idle Speed
M/T at operating temperature 800 ± 50 rpm
A/T at operating temperature 700 ± 50 rpm [3]
Idle Switch
Closes idle speed +250 ± 150 rpm in neutral
Ignition Timing
M/T at 800 rpm 12° ± 2° BTDC
A/T at 700 rpm 12° ± 2° BTDC [3]
[1] Fasteners
[2] With 2.5k ohm resistor in place of water temperature
sensor and with throttle valve switch and O2 sensor disconnected.
[3] Automatic transmission in drive.