Rear Disc Brake Type

Shoe Clearance Adjustment:

SHOE CLEARANCE ADJUSTMENT
1. Remove adjuster hole plug, and turn down adjuster wheel with a screwdriver until shoe touches brake drum. Make sure that parking control lever is released completely.

2. Return adjuster wheel 7 to 8 latches.

3. Install adjuster hole plug, and make sure that there is no drag between shoes and brake drum when rotating disc rotor.

PARKING BRAKE LEVER ADJUSTMENT

Parking Brake Cable Adjustment:

1. Loosen lock nut A, rotate adjuster B.

2. Tighten lock nut A.

Parking Brake Lever Adjustment:

3. Pull control lever with specified amount of force. Check lever stroke and ensure smooth operation.

Number of notches:

Center lever type: 10 - 12

Stick lever type: 10 - 12 (2WD) 9-11 (4WD)

Center Lever Type: 7 - 9 (Van and Wagon)

Parking Brake Warning Lamp Switch:

4. Bend parking brake warning lamp switch plate so that brake warning light comes on when ratchet at parking brake lever is pulled "A" notches and goes out when fully released.

NUMBER OF NOTCHES
Truck-
Center lever type: 1
Stick lever type: 2

Van and Wagon-
Center Lever Type: 2