Suspension

^ When removing each suspension part, check wheel alignment and adjust if necessary.
^ When installing a bushing, do not allow it to project beyond the surface area of the washer.
^ Do not allow the bushings and washers to come in contact with grease, oil soapy water, etc.
^ When installing stabilizer bar, compression rod, lower and upper links, final tightening must be carried out under unladen condition [1] with tires on the ground.
^ When removing or installing brake tubes, use flare nut torque wrench.

[1] Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.