Crankshaft, Engine

Crankshaft:
Standard Journal Diameter:
Main Bearing [02]
Crank Pin 1.9670-1.9675

Out Of Round [01] 0.0002 [03]
Taper [01] 0.0002 [03]

Bearing Clearance:
Main Bearings 0.0011-0.0022
Connecting Rod Bearings 0.0006-0.0021

Connecting Rods:
Piston Pin Bore Diameter 0.8261-0.8265
Side Clearance 0.0079-0.0138

[01] -- Maximum.
[02] -- Grade 0, 2.4790-2.4793 inches; grade 1, 2.4787-2.4790 inches; grade 2, 2.4784-2.4787 inches.
[03] -- Standard.

NOTE: All Measurements are given in inches unless otherwise specified.