With Scan Tool

NOTE: For information regarding extracting/displaying diagnostic trouble codes with CONSULT (Nissan's Scantool), refer to the CONSULT operation manual.

1. Turn off ignition switch.

CONSULT Connected To Data Link Connector:

2. Connect CONSULT to data link connector for CONSULT. (Data link connector for CONSULT is located in lower side instrument panel.)

CONSULT Operation:

3. Turn on ignition switch.
4. Touch "START".

CONSULT Operation:

5. Touch "ENGINE."

CONSULT Operation:

ECCS Component Parts Application:

6. Perform each diagnostic test mode according to the inspection sheet as follows: