Without Scan Tool

USING THE WARNING LAMP





Self-diagnosis results (problem codes) can be also read by using the supplemental "AIR BAG" warning lamp.

The supplemental "AIR BAG" warning lamp on the instrument panel operates as shown below:





How To Alternate Self-Diagnosis And Erase Codes

Problem codes are displayed in present diagnosis mode (self-diagnosis result 1). The problem code last indicated is displayed in initial diagnosis mode (self-diagnosis result 2).

- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory by returning to user mode.
- If a malfunctioning part is not completely repaired, self-diagnosis results will not be cleared.

IMPORTANT: "AIR BAG" warning lamp will continue to flash if:

1. System is not returned to user mode.
2. Malfunctioning parts are not completely repaired.

USER MODE:

PRESENT DIAGNOSIS MODE:

INITIAL DIAGNOSIS MODE:

Self-diagnosis results in present- and initial-diagnosis modes can be identified by number of flashes. Refer to table below for malfunctioning parts.





Warning Lamp Flashing Times And Repair