With Consult Scan Tool

DIAGNOSTIC PROCEDURE 2 Inspecting SRS Malfunctioning Parts Using Consult






Inspecting SRS malfunctioning parts by using CONSULT - Diagnosis mode

1. Turn ignition switch "OFF".

2. Connect "CONSULT" to Data link connector.

3. Turn ignition switch "ON".






4. Touch "START".







5. Touch "AIRBAG".








6. Touch "SELF-DIAG [CURRENT]".

7. Diagnostic codes are displayed on "SELF-DIAG [CURRENT]".

If no self-diagnostic failure is detected on "SELF-DIAG [CURRENT]" but malfunction is indicated by the "AIR BAG" warning lamp, go to DIAGNOSTIC PROCEDURE 6.

8. Touch "PRINT".

9. Compare diagnostic codes to the CONSULT DIAGNOSTIC CODE CHART, .

10. Touch "BACK" key of CONSULT until SELECT SYSTEM appears, then turn off CONSULT

11. Turn ignition switch "OFF", then disconnect CONSULT and both battery cables.

CONSULT DIAGNOSTIC CODE CHART:

Warning Lamp Code Chart

12. Repair the system as outlined by the "Repair order" in CONSULT DIAGNOSTIC CODE CHART, that corresponds to the problem code. For replacement procedure of component parts.

13. After repairing the system, go to DIAGNOSTIC PROCEDURE 4.