Transmission Speed Sensor: Testing and Inspection

DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE
With Consult




After the repair, perform the following procedure to confirm the malfunction is eliminated.
(1) Start engine.
(2) Select "SELF-DIAG RESULTS" mode with CONSULT
(3) Drive vehicle under the following conditions: Selector lever in D, vehicle speed higher than 30 km/h (19 MPH), throttle opening greater than 1/8 of the full throttle position and driving for more than 5 seconds.

OR


With GST




(1) Start engine.
(2) Drive vehicle under the following conditions: Selector lever in D, vehicle speed higher than 30 km/h (19 MPH), throttle opening greater than 1/8 of the full throttle position and driving for more than 5 seconds.
(3) Select "MODE 3" with GST

OR

Without Scan Tools




(1) Start engine.
(2) Drive vehicle under the following conditions: Selector lever in D, vehicle speed higher than 30 km/h (19 MPH), throttle opening greater than 1/8 of the full throttle position and driving for more than 5 seconds.
(3) Perform self-diagnosis.


DIAGNOSTIC PROCEDURE





REVOLUTION SENSOR
Resistance Inspection







- Check resistance between terminals (1), (2) and (3) as shown above.