Output Shaft End Play

- Measure clearance between side cover and the end of the output shaft bearing.
- Select proper thickness of adjusting shim so that clearance is within specifications.




1. Install bearing retainer for output shaft.




2. Install output shaft thrust needle bearing on bearing retainer.




3. Install output shaft on transmission case.




4. Measure dimensions "row(1)" and "row(2)" at side cover and then calculate dimension "A".
- Measure dimension "row(1)" and "row(2)" in at least two places.

"A": Distance between transmission case fitting surface and adjusting shim mating surface.

A = row(1) - row(2) row(2): Height of gauge




5. Measure dimensions "row(2)" and "row(3)" and then calculate dimension "B".
Measure "row(2)" and "row(3)" in at least two places.

"B": Distance between the end of output shaft bearing outer race and the side cover fitting surface of transmission case.

B = row(2) - row(3) row(2): Height of gauge




6. Select proper thickness of adjusting shim so that output shaft end play (clearance between side cover and output shaft bearing) is within specifications.

Output shaft end play (A - B): 0 - 0.15 mm (0 - 0.0059 in)

Output shaft end play adjusting shim: Total End Play
7. Install adjusting shim on output shaft bearing.