With Consult Scan Tool

Inspecting SRS Malfunctioning Parts By Using CONSULT - Diagnosis Mode

Diagnostic Procedure 2:

1. Turn ignition switch OFF.
2. Connect CONSULT to data link connector.

Diagnostic Procedure 2:

3. Turn ignition switch ON.
4. Touch START.

Diagnostic Procedure 2:

5. Touch AIRBAG.

Diagnostic Procedure 2:

6. Touch SELF-DIAG [CURRENT].

Diagnostic Procedure 2:

7. Diagnostic codes are displayed on SELF-DIAG [CURRENT].

Diagnostic Procedure 2:

^ If no self-diagnostic failure is detected on SELF-DIAG [CURRENT] even though a malfunction is detected in DIAGNOSTIC PROCEDURE 1, go to DIAGNOSTIC PROCEDURE.
8. Touch PRINT
9. Compare diagnostic codes to the CONSULT DIAGNOSTIC CODE CHART.
10. Touch BACK key of CONSULT until SELECT SYSTEM appears, then turn off CONSULT
11. Turn ignition switch OFF, then disconnect CONSULT and both battery cables.
12. Repair the system as outlined by the Repair order in CONSULT DIAGNOSTIC CODE CHART that corresponds to the problem code. For replacement procedure of component parts.
13. After repairing the system, connect battery cables and go to DIAGNOSTIC PROCEDURE 4.

Consult Diagnostic Code Chart:

CONSULT DIAGNOSTIC CODE CHART