With Consult Scan Tool
Inspecting SRS Malfunctioning Parts By Using CONSULT - Diagnosis Mode1. Turn ignition switch "OFF".
Data Link Connector:
2. Connect CONSULT to Data link connector.
3. Turn ignition switch "ON".
Diagnostic Procedure 2 / Start:
4. Touch "START".
Diagnostic Procedure 2 / Airbag:
5. Touch "AIRBAG".
Diagnostic Procedure 2 / Self-Diag [Current]:
6. Touch "SELF-DIAG [CURRENT]".
Diagnostic Procedure 2 / Failure Detected Control Unit:
7. Diagnostic codes are displayed on "SELF-DIAG [CURRENT]".
Diagnostic Procedure 2 / No Failure Indicated:
If no self-diagnostic failure is detected on "SELF-DIAG [CURRENT]" even though a malfunction is detected in DIAGNOSTIC PROCEDURE 1, go to DIAGNOSTIC PROCEDURE 6.Procedure 6
8. Touch "PRINT".
9. Compare diagnostic codes to the CONSULT DIAGNOSTIC CODE CHART.
10. Touch "BACK" key of CONSULT until "SELECT SYSTEM MODE" appears in order to return to User mode from Diagnosis mode, then turn off CONSULT.
11. Turn ignition switch OFF, then disconnect CONSULT and both battery cables.
12. Repair the system as outlined by the Repair order in CONSULT DIAGNOSTIC CODE CHART, that corresponds to the problem code. For replacement procedure of component parts.
13. After repairing the system, connect battery cables and go to DIAGNOSTIC PROCEDURE 4.Procedure 4
Consult Diagnostic Code Chart:
CONSULT DIAGNOSTIC CODE CHART ("SELF-DIAG [CURRENT]")