Disassembly/Assembly

DISASSEMBLY AND ASSEMBLY





- When disassembling and assembling, unlock steering lock with key.
- Install lock nut on steering column shaft and tighten the nut to specification.

25 - 34 Nm (2.5 - 3.5 kg-m, 18 - 25 ft. lbs.)





- Steering lock
a. Break self-shear type screws using a drill or other appropriate tool.





b. Install self-shear type screws, then tighten until heads break off.

Tilt Mechanism





After installing steering column, check tilt mechanism operation.

INSPECTION





- If steering wheel does not turn smoothly, check the steering column as follows and replace damaged parts.
a. Check column bearings for damage and unevenness. Lubricate with recommended multipurpose grease or replace steering column as an assembly, If necessary.
b. Check jacket tube for deformation and breakage. Replace if necessary.
- If the vehicle is involved in a light collision, check dimension "L". If it is not within specification, replace steering column as an assembly.

Column length "L": 863.1 - 866.7 mm (33.98 - 34.12 inch)