Crankshaft
| Crankshaft Main Journal Diameter (Dm) | Grade No.0 | 59.967 - 59.975 Millimeter (mm) | |
| Grade No.1 | 59.959 - 59.967 Millimeter (mm) | ||
| Grade No.2 | 59.951 - 59.959 Millimeter (mm) | ||
| Pin Journal Diameter (Dp) | Grade No.0 | 49.968 - 49.974 Millimeter (mm) | |
| Grade No.1 | 49.962 - 49.968 Millimeter (mm) | ||
| Grade No.2 | 49.956 - 49.962 Millimeter (mm) | ||
| Taper Of Journal and Pin [A - B] | Journal | Limit | 0.01 Millimeter (mm) |
| Pin | Limit | 0.005 Millimeter (mm) | |
| Out-Of-Round Of Journal and Pin [X - Y] | Journal | Limit | 0.01 Millimeter (mm) |
| Pin | Limit | 0.005 Millimeter (mm) | |
| Runout [TIR] = Total indicator reading | Limit | 0.10 Millimeter (mm) | |
| Free End Play | Standard | 0.05 - 0.18 Millimeter (mm) | |
| Limit | 0.3 Millimeter (mm) | ||
| Fillet Roll | Standard & Limit | More Than 0.1 mm |