Bleeding Procedure

AIR BLEEDING PROCEDURE
Bleed air according to the following procedure.
Bleed air from operating cylinder.
1) Fill the master cylinder reservoir tank with new brake fluid.





2) Connect a transparent vinyl hose to the air bleeder.
3) Slowly depress the clutch pedal to its full stroke length and release it completely. Repeat this operation several times at 2 to 3 second intervals.
4) Open the air bleeder with the clutch pedal fully depressed.
5) Close the air bleeder.
6) Release the clutch pedal and wait at least 5 seconds.
7) Repeat steps 3 through 6 above until air bubbles no longer appear in the brake fluid