Differential Case

DIFFERENTIAL CASE
1. Remove side bearing inner cones.





To prevent damage to bearing, engage puller jaws in grooves.
Tool numbers:
A ST33051001 (J22888-20)
B ST33061000 (J8107-2)





Be careful not to confuse the right and left hand parts.





2. Loosen ring gear bolts in a criss-cross fashion.
3. Tap ring gear off the differential case with a soft hammer.
Tap evenly all around to keep ring gear from binding.





4. Punch off pinion mate shaft lock pin from ring gear side.
Lock pin is caulked at pin hole mouth on differential case.