Instrument Cluster / Carrier: Description and Operation

System Description

Power is supplied at all times
- through 10 A fuse (with KA24DE engine) (No.39, located in the fuse and fusible link box) or
- through 15 A fuse (with VG33E engine) (No.39, located in the fuse and fusible link box)
- to lighting switch terminal 11.

The lighting switch must be in the parking and tail lamps ON (1ST) or headlamps ON (2ND) position for illumination.
The illumination control switch controls the amount of current to the illumination system. As the amount of current increases, the illumination becomes brighter.




The following chart shows the power and ground connector terminals for the components included in the illumination system.

The ground for all of the components are controlled through terminals 4 and 5 of the illumination control switch and body grounds M14 and M68.