Operational Check

The purpose of the operational check is to confirm that the system operates as it should. The systems which are checked are the blower, mode (discharge air), intake air, temperature decrease, temperature increase.

CONDITIONS:
Engine running at normal operating temperature.

PROCEDURE:




1. Check Blower
1. Turn fan control knob to 1-speed.
Blower should operate on 1-speed.
2. Then turn fan control knob to 2-speed.
3. Continue checking blower speed until all four speeds are checked.
4. Leave blower on 4-speed.

2. Check Discharge Air




1. Turn mode control knob.




2. Confirm that discharge air comes out according to the air distribution table at left.
Refer to "Discharge Air Flow" in "DESCRIPTION".




3. Check Recirculation
1. Press recirculation switch. Recirculation indicator should light.
2. Listen for intake door position change (you should hear blower sound change slightly).

NOTE: Confirm that the RECIRCULATION (REC) switch is canceled in the DEF and D/F mode.




4. Check Temperature Decrease
1. Turn temperature control knob to full cold.
2. Check for cold air at discharge air outlets.




5. Check Temperature Increase
1. Turn temperature control knob to full hot.
2. Check for hot air at discharge air outlets.




6. Check Air Conditioner Switch
Turn fan control knob to the desired (1 to 4-speed) position and push the air conditioner switch to turn ON the air conditioner. The indicator light should come on when air conditioner is ON.