Interface Box Power Cable/Harness Connections Check Procedure

1. Remove the DVD unit (see Removal and Replacement of the DVD unit/checking the DVD unit to Interface Box connector).

2. Remove the left rear trim panel (refer to the BT section of the appropriate Service Manual).





3. Remove the Interface Box and check the connectors (see Figure 8).

NOTE:
Refer to the Audio chapter in the EL section of the appropriate Service Manual for diagrams on the Interface Box and radio AUX switch circuits and wiring.

Please note that in the Service Manual:

^ The Interface Box is called "Aux Box."

^ The radio AUX switch is called "Rear TV Switch."

3. Re-assembly is the reverse of removal.