Operation CHARM: Car repair manuals for everyone.

Bleeding Procedure

AIR BLEEDING PROCEDURE

CAUTION:
- Check the clutch fluid level of the reservoir for shortage.
- Keep clutch fluid away from the coating surface of the body or other parts. If it adheres, remove it quickly and flush the area with water.

1. Fill up master cylinder reservoir tank with new clutch fluid.





2. Connect a clear vinyl hose to air bleeder.
3. Carefully depress clutch pedal fully and release it. Repeat the cycle several times at an interval of 2 or 3 seconds.
4. While depressing clutch pedal, open air bleeder.
5. Close air bleeder.
6. Release clutch pedal, and wait for approx. 5 seconds.
7. Repeat steps 3 to 6 until no air is found in brake fluid.