Power Locks: Testing and Inspection
SYMPTOM CHART
MAIN POWER SUPPLY AND GROUND CIRCUIT CHECK
Main Power Supply Circuit Check
If check result for terminal 13 is NG, check the following
- 7.5 A fuse (No.39, located in the fuse and fusible link box)
- Harness for open or short between [1][2]smart entrance control unit and fuse.
If check result for terminal 7 is NG, check the following
- 30 A fusible link (letter f, located in the fuse and fusible link box)
- Circuit breaker-1
- Harness for open or short between [1][2]smart entrance control unit and fusible link.
Ground Circuit Check
Steps 1 - 2:
FRONT DOOR SWITCH CHECK
Steps 1 - 2:
SLIDING DOOR SWITCH CHECK
Steps 1 - 2:
KEY SWITCH (INSERTED) CHECK
Step 1:
Step 2:
DOOR LOCK/UNLOCK SWITCH CHECK
Steps 1 - 2:
DOOR KEY CYLINDER SWITCH CHECK (WITH VEHICLE SECURITY SYSTEM)
Steps 1 - 2:
FRONT DOOR UNLOCK SENSOR CHECK
Step 1:
Step 2:
DOOR LOCK ACTUATOR CHECK