Description

System Description
Refer to Owner's Manual for ASCD operating instructions.

POWER SUPPLY AND GROUND
Power is supplied at all times
- through 15 A fuse [No.22 located in the fuse block (J/B)] (2-door models) or
- through 20 A fuse [No.22 located in the fuse block (J/B)] (4-door models)
- to the stop lamp switch terminal 1

When ignition switch is in the ON or START position power is supplied
- through 10 A fuse [No.5 located in the fuse block (J/B)]
- to ASCD control unit terminal 5.
- through 7.5 A fuse [No.12 located in the fuse block (J/B)]
- to park/neutral position switch terminal 1
- through 10 A fuse [No.11 located in the fuse block (J/B)]
- to combination meter terminals 32 and 38.

When park/neutral position switch (A/T) is in the P or N position ground is supplied
- to park/neutral position switch terminal 2
- through ASCD relay terminal 1
- to ASCD relay terminal 2
- through body grounds M14 and M68.

When ON-OFF switch is depressed (ON) ground is supplied
- to ASCD control unit terminal 11
- from ASCD steering switch terminal 13
- to ASCD steering switch terminal 14
- from ASCD control unit terminal 24

Then ASCD control unit illuminates CRUISE indicator.

Ground is supplied
- to combination meter terminal 36
- from ASCD control unit terminal 15.

Ground is supplied
- to ASCD control unit terminal 17
- through body grounds M14 and M68.