Cargo Lamp: Description and Operation

MODELS WITHOUT POWER DOOR LOCKS

Cargo Lamp
With the ignition switch in ACC or ON position power is supplied
- through 15 A fuse [No.23 located in fuse block (J/B)]
- to cargo lamp switch terminal 2.

When cargo lamp switch is ON and cargo lamp switch (built into cargo lamp) is ON power is supplied
- through cargo lamp switch terminal 3
- to cargo lamp terminal + and
- to cargo lamp switch terminal 4.

Ground is supplied
- to cargo lamp terminal -, and
- to cargo lamp switch terminal 5
- through body grounds M14 and M68.


MODELS WITH POWER DOOR LOCKS
Cargo Lamp
With the ignition switch in ACC or ON power is supplied
- through 15 A fuse [No.23 located in the fuse block (J/B)]
- to cargo lamp switch terminal 2.

When cargo lamp switch is ON and cargo lamp switch (built into cargo lamp) is ON power is supplied
- through cargo lamp switch terminal 3
- to cargo lamp terminal + and
- to cargo lamp switch terminal 4.

Ground is supplied
- to cargo lamp terminal -, and
- to cargo lamp switch terminal 5
- through body grounds M14 and M68.

ON-OFF CONTROL
When the front door LH front door RH rear LH or rear RH door is opened the interior room lamp turns on while the room lamp switch is in the "DOOR" position.

BATTERY SAVER
On models with smart entrance control unit, the lamp turns off automatically when room lamp, map lamp and/or spot lamp is illuminated with the ignition key in OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch in ON position for more than 30 minutes.