Fog/Driving Lamp: Adjustments

Aiming Adjustment




Before performing aiming adjustment make sure of the following.
1. Keep all tires inflated to correct pressure.
2. Place vehicle on level ground.
3. See that vehicle is unloaded (except for full levels of coolant engine oil and fuel and spare tire jack and tools). Have the driver or equivalent weight placed in driver seat.

Loosen front fog lamp adjusting nuts and adjust aiming by moving front fog lamps.




1. Set the distance between the screen and the center of the front fog lamp lens as shown at left.
2. Turn front fog lamps ON.




3. Adjust front fog lamps so that the top edge of the high intensity zone is 100 mm (4 in) below the height of the fog lamp centers as shown at left.
- When performing adjustment, if necessary, cover the headlamps and opposite fog lamp.

4. Tighten the front fog lamp adjusting nuts.