Map Light: Description and Operation

MODELS WITHOUT POWER DOOR LOCKS
Map Lamp
Power is supplied at all times
- through 7.5 A fuse [No.26 located in fuse block (J/B)]
- to map lamp terminal +.

With the map lamp switch in the ON position ground is supplied
- to map lamp terminal -
- through body grounds M14 and M68.


MODELS WITH POWER DOOR LOCKS
Map Lamp
Power is supplied at all times
- through 7.5 A fuse [No.28 located in the fuse block (J/B)]
- to smart entrance control unit terminal 49
- through smart entrance control unit terminal 50
- to map lamp terminal +.

With the map lamp switch in the ON position ground is supplied to map lamp terminal - through body grounds M14 and M68.


ON-OFF CONTROL
When the front door LH front door RH rear LH or rear RH door is opened the interior room lamp turns on while the room lamp switch is in the "DOOR" position.


BATTERY SAVER
On models with smart entrance control unit, the lamp turns off automatically when room lamp, map lamp and/or spot lamp is illuminated with the ignition key in OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch in ON position for more than 30 minutes.