On-Vehicle Service

FRONT OIL SEAL REPLACEMENT
1. Remove propeller shaft.






2. Loosen drive pinion nut.

Tool number: KV38108300 (J-44195)






3. Remove companion flange.
4. Remove ABS sensor and sensor rotor (2WD models).






5. Remove front oil seal.






6. Apply multi-purpose grease to cavity at sealing lips of oil seal. Press front oil seal into carrier.

Tool number: KV38100500 (325273)

NOTE: Always install a new sensor rotor.

7. Install ABS sensor and sensor rotor (2WD models).
8. Install companion flange and drive pinion nut.
9. Install rear propeller shaft.