Rear Cover Gasket Replacement

FRONT OIL SEAL REPLACEMENT (Front final drive: Model R200A)
1. Remove propeller shaft.





2. Remove drive pinion nut.
Tool number: KV38108300 (J44195)





3. Remove companion flange.
4. Remove ABS sensor and sensor rotor (2WD models).





5. Remove front oil seal.





6. Apply multi-purpose grease to cavity at sealing lips of oil seal. Press front oil seal into carrier.
Tool number: KV38100500 (325273)

NOTE: Always install a new sensor rotor.

7. Install ABS sensor and sensor rotor (2WD models).
8. Install companion flange and drive pinion nut.
9. Install propeller shaft.