Camshaft - End Play
CAMSHAFT END PLAY1. Install camshaft and locate plate in cylinder head.
2. Measure camshaft end play.
Camshaft end play:
Standard: 0.03 - 0.06 mm (0.0012 - 0.0024 inch)
3. If it is out of the specified range, select thickness of camshaft locate plate to obtain standard specified end play.
Example:
When camshaft end play is 0.08 mm (0.0031 inch) with camshaft locate plate 1, replace camshaft locate plate 1 with camshaft locate plate 4 to set the end play at 0.04 mm (0.0016 inch).