Clutch Hydraulic System: Service and Repair

Inspection and Adjustment / AIR BLEEDING PROCEDURE

Bleed air according to the following procedure.

Bleed air from operating cylinder.





1. Fill the master cylinder reservoir tank with new brake fluid.
2. Connect a transparent vinyl hose to the air bleeder.
3. Slowly depress the clutch pedal to its full stroke length and release it completely.
Repeat this operation several times at 2 to 3 second intervals.

4. Open the air bleeder with the clutch pedal fully depressed.
5. Close the air bleeder.
6. Release the clutch pedal and wait at least 5 seconds.
7. Repeat steps 3 through 6 above until air bubbles no longer appear in the brake fluid.