Differential Case

DIFFERENTIAL CASE
1. Remove side bearing inner cones.
To prevent damage to bearing, engage puller jaws in grooves.


Tool number:
A - ST33051001 (J22888-20)
B - ST33061000 (J8107-2)






Be careful not to confuse the right-hand and left-hand parts. Keep bearing and bearing race for each side together.






2. Loosen ring gear bolts in a crisscross pattern.
3. Tap ring gear off the differential case with a soft hammer.
Tap evenly all around to keep ring gear from binding.






4. Punch off pinion mate shaft lock pin from ring gear side.
Lock pin is caulked at pin hole mouth on differential case.