Engine Compartment

- All dimensions indicated in the figures are actual.
- When using a tracking gauge, adjust both pointers to equal length, then check pointers and he gauge to make sure there is no free play
- When a measuring tape is used, check to be sure there is no elongation, twisting or bending.
- Measurements should be taken at the center of the mounting holes.
- An asterisk (*) following the value at the measuring point indicates that the measuring point on the other side is symmetrically the same value.
- The coordinates of the measurement points are the distances measured from the standard line of "X" "Y" and "Z".

Engine Compartment:

Measurement
Figure marked with * indicate symmetrically identical dimensions on both right and left hand sides of the vehicle.

Engine Compartment:

Measurement Points