Engine Cannot Be Started In P and N Position

2. Engine Cannot Be Started In P and N Position

SYMPTOM:
^ Engine cannot be started with selector lever in P or N position.
^ Engine cannot be started with selector lever in P. Engine can be started with selector lever in D, 2, 1 or R position.

1. CHECK PNP SWITCH CIRCUIT

With CONSULT-II
Does "TCM INPUT SIGNALS" in Data Monitor show damage to PNP switch circuit?

Without CONSULT-II





Does self-diagnosis show damage to PNP switch circuit?
Yes or No
Yes >> Check PNP switch circuit. Refer to "DTC P0705 PARK/NEUTRAL POSITION (PNP) SWITCH".
No >> GO T0 2.

2. CHECK PNP SWITCH INSPECTION





Check for short or open of PNP switch 2-pin connector.

OK or NG
OK >> GO TO 3.
NG >> Repair or replace PNP switch.
3. CHECK STARTING SYSTEM
Check starting system.
OK or NG
OK >> INSPECTION END.
NG >> Repair or replace damaged parts.