Lock-Up Is Not Released

14. Lock-up Is Not Released

SYMPTOM:
^ Lock-up is not released when accelerator pedal is released.

1. CHECK THROTTLE POSITION SWITCH CIRCUIT

With CONSULT
Does "TCM INPUT SIGNALS" in Data Monitor show damage to closed throttle position switch circuit?

Without CONSULT





Does self-diagnosis show damage to closed throttle position switch circuit?

Yes or No
Yes >> Check closed throttle position switch circuit. Refer to "DTC P1705 THROTTLE POSITION SENSOR".
No >> GO TO 2.

2. CHECK SYMPTOM
Check again.
OK or NG
OK >> INSPECTION END
NG >>
1. Perform TCM input/output signal inspection.
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.