Initial Inspection and Diagnostic Overview

BASIC INSPECTION
1. CHECK ALL TIRE PRESSURES
Check all tire pressures.

Tire pressure:................240 kPa (2.4 kg/cm2, 35 psi)

OK or NG?

OK >> GO TO 2.
NG >> Adjust tire pressures to specified value.

2. CHECK WARNING LAMP ACTIVATION
Check warning lamp activation.
Warning lamp should activate for 1 second when ignition switch is turned ON.

OK or NG?

OK >> GO TO 3.
NG >> Check fuse and combination meter.

3. CHECK CONNECTOR
1. Disconnect low tire pressure warning control unit harness connector.
2. Check pin terminals for damage.
3. Reconnect harness connector.

OK or NG?

OK >>GO TO 4.
NG >> Repair or replace damaged parts.

4. CHECK TRANSMITTER ACTIVATION TOOL BATTERY
Check transmitter tool battery.

OK or NG?

OK >> Carry out self-diagnosis.
NG >> Replace transmitter activation tool battery.