HDC/HSA/VDC/TCS/ABS

Inspection For Self-Diagnosis Result Decel G Sen Set
INSPECTION PROCEDURE
1. PERFORM SELF-DIAGNOSIS
Perform ABS actuator and electric unit (control unit) self-diagnosis.





Do self-diagnosis results indicate anything other than shown above?
YES >> Perform repair or replacement for the item indicated.
NO >> Perform calibration of yaw rate/side/decal G sensor. Refer to BRC-150, Calibration of Yaw Rate/ Side/Decel G Sensor. GO TO 2.

2. PERFORM SELF-DIAGNOSIS AGAIN
1. Turn the ignition switch to OFF and then to ON and erase self-diagnosis results.
2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.
Are any self-diagnosis results displayed?
YES >> Replace yaw rate/side/decal G sensor. On-Vehicle Service
NO >> Inspection End.