Inspection For Self-Diagnosis Result St Angle Sen Signal

Inspection For Self-Diagnosis Result ST Angle Sen Signal
INSPECTION PROCEDURE
1. PERFORM SELF-DIAGNOSIS
Perform ABS actuator and electric unit (control unit) self-diagnosis.





Do self-diagnosis results indicate anything other than shown above?
YES >> Perform repair or replacement for the item indicated.
NO >> Perform adjustment of steering angle sensor neutral position. Refer to BRC-150, Adjustment of Steering Angle Sensor Neutral Position. Testing and Inspection
GO TO 2.

2. PERFORM SELF-DIAGNOSIS AGAIN
1. Turn the ignition switch to OFF and then to ON and erase self-diagnosis results.
2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.
Are any self-diagnosis results displayed?
YES >> Replace steering angle sensor.
NO >> Inspection End.