Steering Angle Sensor Safe Mode

Steering Angle Sensor Safe Mode Inspection
INSPECTION PROCEDURE
1. INDICATOR LAMP CHECK
Check that VDC OFF indicator lamp is on.
OK or NG
OK >> GO TO 2.
NG >> GO TO 3.

2. ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION
Adjust steering angle sensor neutral position. Refer to Adjustment of Steering Angle Sensor Neutral Position.
OK or NG
OK >> GO TO 3.
NG >> Check steering angle sensor. Refer to Steering Angle Sensor System.

3. INDICATOR LAMP CHECK
Check that VDC OFF indicator lamp is off.
OK or NG
OK >> GO TO 4.
NG >> Perform basic inspection. Refer to BRC-109, Basic Inspection. Basic Inspection

4. CHECK SELF-DIAGNOSTIC RESULTS
Perform ABS actuator and electric unit (control unit) self-diagnosis.





NOTE: When self-diagnostic results show items other than those above, perform repair or replacement for the item indicated and repeat self-diagnosis.

Is the above displayed on self-diagnosis display?
YES >> Erase error memory.
NO >> Inspection End.