Initial Inspection and Diagnostic Overview

BASIC INSPECTION
1. CHECK ALL TIRE PRESSURES
Check all tire pressures. Refer to "Tire".
OK or NG
OK >> GO TO 2.
NG >> Adjust tire pressure to specified value.

2. CHECK LOW TIRE PRESSURE WARNING LAMP ACTIVATION
Check low tire pressure warning lamp activation. Does warning lamp activate for 1 second when ignition switch is turned ON?
YES >> GO TO 3.
NO >> Check fuse and combination meter.

3. CHECK CONNECTOR
1. Disconnect BCM harness connectors.
2. Check terminals for damage or loose connection.
3. Reconnect harness connectors.
OK or NG
OK >> GO TO 4.
NG >> Repair or replace damaged parts.

4. CHECK TRANSMITTER ACTIVATION TOOL
Check transmitter activation tool battery.
OK or NG
OK >> Carry out self-diagnosis.
NG >> Replace transmitter activation tool battery.