Wheel Sensor

Removal and Installation
REMOVAL
1. Remove wheel sensor mounting screw(s).
^ When removing the front wheel sensor, first remove the disc rotor to gain access to the front wheel sensor. Refer to Removal and Installation of Brake Caliper Assembly and Disc Rotor.
2. Pull out the sensor, being careful to turn it as little as possible.

CAUTION:
^ Be careful not to damage sensor edge and sensor rotor teeth.
^ Do not pull on the sensor harness.

3. Disconnect wheel sensor harness electrical connector, then remove harness from mounts.

INSTALLATION
^ Before installing wheel sensors,
- Inspect and replace sensor assembly if damaged.
- Clean wheel sensor hole and mounting surface with brake cleaner and a lint-free shop rag. Be careful that dirt and debris do not enter the axle.
- Replace wheel sensor O-ring, then apply a coat of suitable grease to the O-ring and mounting hole.
^ Installation is in the reverse order of removal.