Harmonic Balancer - Crankshaft Pulley
Crankshaft PulleyInstall crankshaft pulley as follows:
Install crankshaft pulley, taking care not to damage front oil seal.
When press-fitting crankshaft pulley with plastic hammer, tap on its center portion (not circumference).
Tighten crankshaft pulley bolt.
Crankshaft bolt torque 44.1 Nm (4.5 kg-m, 33 ft. lbs.)
Put a paint mark on crankshaft pulley aligning with angle mark on crankshaft pulley bolt. Then, further retighten bolt by 60° (equivalent to one graduation).
Rotate crankshaft pulley in normal direction (clockwise when viewed from front) to confirm it turns smoothly.