Checking Steering Wheel Turning Force
CHECKING STEERING WHEEL TURNING FORCE1. Park the vehicle on a level, dry surface and set the parking brake.
2. Start the engine.
3. Bring the power steering fluid up to adequate operating temperature. Make sure the fluid temperature is approximately 50° - 80°C (122° - 176°F).
NOTE: Tires need to be inflated to normal pressure.
4. Turn the steering wheel 360° from the neutral position and measure the steering wheel turning force, using Tool.
Tool number: - (J-44372)
Steering wheel turning force: 39 N (4 kg-f, 9 ft. lbs.) or less
5. If the steering wheel turning force is out of specification, inspect the steering column. Refer to "INSPECTION AFTER REMOVAL".
6. If the steering column meets specifications, replace the steering gear.