Transmitter Wake Up Operation

WITH TRANSMITTER ACTIVATION TOOL





1. With the transmitter activation tool (J-45295) pushed against the front left transmitter, press the button for 5 seconds.
Tool number: - (J-45295)
^ With ignition switch ON, as the warning lamp flashes per the follow diagram, the respective transmitter then must be woken up.





2. When the BCM finishes assigning each tire ID, the BCM flashes the hazard warning lamps and trailer flasher lamps (if equipped) and sends flashing indicator status by CAN according to the following time chart.
3. After completing wake up of all transmitters, make sure low tire pressure warning lamp goes out.