A/T Fluid Temperature Sensor 2

A/T FLUID TEMPERATURE SENSOR 2 REMOVAL AND INSTALLATION
Removal
1. Disconnect negative battery terminal.
2. Remove oil pan and oil pan gasket. Refer to Removal.





3. Straighten terminal clip to free A/T fluid temperature sensor 2 harness.
4. Disconnect A/T fluid temperature sensor 2 connector.

CAUTION: Be careful not to damage connector.





5. Remove A/T fluid temperature sensor 2 with bracket from control valve with TCM





6. Remove bracket from A/T fluid temperature sensor 2.

Installation

CAUTION: After completing installation, check for A/T fluid leakage and fluid level. Refer to Changing the Automatic Transmission Fluid (ATF) Checking the Automatic Transmission Fluid (ATF).





1. Install A/T fluid temperature sensor 2 to bracket.





2. Install A/T fluid temperature sensor 2 (with bracket) in control valve with TCM Tighten A/T fluid temperature sensor 2 mounting bolt to the specified torque. Refer to COMPONENTS.

CAUTION: Adjust bolt hole of bracket to bolt hole of control valve with TCM.





3. Connect A/T fluid temperature sensor 2 connector.
4. Securely fasten A/T temperature sensor 2 harness with terminal clip.
5. Install oil pan to transmission case. Refer to Installation.
6. Connect the negative battery terminal.