With Manufacturer's Scan Tool (Consult II)

SELF-DIAG RESULT MODE
Operation Procedure
1. Perform "CONSULT-II SETTING PROCEDURE". Refer to TF-43, "CONSULT-II SETTING PROCEDURE". CONSULT-II Function (All Mode AWD/4WD)





2. With engine at idle, touch "SELF-DIAG RESULTS". Display shows malfunction experienced since the last erasing operation.

NOTE:
^ The details for "TIME" are as follows:
^ Error currently detected with transfer control unit.
^ Except for "0": Error detected in the past and memorized with transfer control unit. Detects frequency of driving after DTC occurs (frequency of turning ignition switch "ON/OFF").