Parking Lamp: Service and Repair

Removal and Installation

COMBINATION LAMP ASSEMBLY (FRONT)

CAUTION:
- Turn headlamp switch OFF before disconnecting headlamp harness connector.
- Do not touch bulb by hand right after being turned off. Burning may result.
- Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it.
- Do not leave bulb out of combination lamp assembly (front) for a long time because dust, moisture, smoke, etc. may affect the performance of the lamp. When replacing bulb, be sure to replace it with a new one.

Removal
1. Disconnect combination lamp assembly (front).
2. Remove the front bumper.




3. Remove the bolts (A), disconnect the electrical connectors, and remove the front combination lamp assembly (front) (1).

Installation
Installation is in the reverse order of removal.

Disassembly and Assembly

FRONT COMBINATION LAMP ASSEMBLY

Exploded View EXL-95:

Disassembly
1. Turn high beam bulb counterclockwise to unlock and remove high beam bulb.
2. Turn low beam bulb counterclockwise to unlock and remove low beam bulb.
3. Turn turn signal/parking lamp (front) bulb socket counterclockwise to unlock and remove turn signal/parking lamp (front) bulb.
4. Turn side marker lamp (front) bulb socket counterclockwise to unlock and remove side marker lamp (front) bulb.

Assembly
Assembly is in the reverse order of disassembly.