In P Position, Vehicle Moves When Pushed
In P Position, Vehicle Moves When PushedSYMPTOM: Even though the selector lever is set in the P position, the parking mechanism is not actuated, allowing the vehicle to be moved when it is pushed.
DIAGNOSTIC PROCEDURE
1. CHECK PNP SWITCH CIRCUIT
Perform self-diagnosis. Refer to AT-87, SELF-DIAGNOSTIC RESULT MODE. Pinout Values and Diagnostic Parameters
Do the self-diagnosis results indicate PNP switch?
YES >> Check the malfunctioning system. Refer to DTC P0705 PARK/NEUTRAL POSITION SWITCH.
NO >> GO TO 2.
2. CHECK CONTROL CABLE
Check the control cable.
^ Refer to Checking of A/T Position.
OK or NG
OK >> GO TO 3.
NG >> Adjust control cable. Refer to Adjustment of A/T Position.
3. CHECK PARKING COMPONENTS
Check parking components. Refer to DISASSEMBLY.
OK or NG
OK >> GO TO 4
NG >> Repair or replace damaged parts.
4. CHECK A/T FLUID CONDITION
1. Remove oil pan. Refer to Control Valve With TCM and A/T Fluid Temperature Sensor 2.
2. Check A/T fluid condition. Refer to Fluid Condition Check.
OK or NG
OK >> INSPECTION END
NG >> Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to Symptom Chart (Symptom No.58).