Crew Cab

Removal and Installation

CREW CAB

CAUTION:
- When removing and installing the door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating part for poor lubrication. If necessary, apply body grease.

1. Remove the door finisher. Refer to "Rear Door - Crew Cab".
2. Remove the inner seal.
3. Remove the door window and regulator assembly. Refer to "FRONT DOOR GLASS REGULATOR", "REAR DOOR GLASS AND REGULATOR".
4. Remove the door harness.
5. Remove the check link cover.




6. Remove the check link bolt from the hinge pillar.




7. Remove the door-side hinge nuts and bolts, and the door assembly.

Installation is in the reverse order of removal.