Preliminary Check
BASIC INSPECTION1. CHECK BCM CONFIGURATION
Confirm BCM configuration for "DISPLAY STYLE" is set to:
^ "MODE1" for vehicles without Navigation display screen.
^ "MODE2" for vehicles with Navigation display screen.
Refer to "READ CONFIGURATION PROCEDURE".
OK or NG
OK >> GO TO 2.
NG >> Change BCM configuration for "DISPLAY STYLE" to "MODE1" or "MODE2". Refer to "WRITE CONFIGURATION PROCEDURE".
2. CHECK ALL TIRE PRESSURES
Check all tire pressures.
Tire pressure
17 inch tire 240 kPa (2.3 kg/cm2, 35 psi)
18 inch tire 240 kPa (2.4 kg/cm2, 35 psi)
OK or NG
OK >> GO TO 3.
NG >> Adjust tire pressure to specified value.
3. CHECK LOW TIRE PRESSURE WARNING LAMP ACTIVATION
1. Check low tire pressure warning lamp activation.
2. Does low tire pressure warning lamp activate for 1 second when ignition switch is turned "ON"?
Does warning lamp activate?
YES >> GO TO 4.
NO >> Check fuse and combination meter.
4. CHECK CONNECTOR
1. Disconnect BCM harness connector.
2. Check terminals for damage or loose connection.
3. Reconnect harness connector.
OK or NG
OK >> GO TO 5.
NG >> Repair or replace damaged parts.
5. CHECK TRANSMITTER ACTIVATION TOOL
Check transmitter activation tool battery.
OK or NG
OK >> Carry out self-diagnosis.
NG >> Replace transmitter activation tool battery.