Operation CHARM: Car repair manuals for everyone.

Control Module: Adjustments

METHOD FOR ADJUSTMENT WITH 4WD SHIFT SWITCH AT 2WD
Select adjustment pattern
1. Start engine. (Stay for at least 10 seconds.)





2. Check 4WD shift indicator lamp and 4LO indicator lamp.

Pattern A
1. Stop vehicle and move A/T selector lever to N position with brake pedal depressed. (Stay for at least 2 seconds.)
2. Turn 4WD shift switch to 4LO position. (Stay for at least 2 seconds.)
3. Turn ignition switch OFF.
4. Start engine.
5. Erase self-diagnosis. Refer to How to erase self-diagnostic results (with CONSULT-II) or ERASE SELF-DIAGNOSIS (without CONSULT-II).
6. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to CHECK 4WD SHIFT INDICATOR PATTERN.
If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.

Pattern B
1. Stop vehicle and move A/T selector lever to N position with brake pedal depressed. (Stay for at least 2 seconds.)
2. Turn ignition switch OFF.
3. Start engine.
4. Erase self-diagnosis. Refer to How to erase self-diagnostic results (with CONSULT-II) or ERASE SELF-DIAGNOSIS (without CONSULT-II).
5. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to CHECK 4WD SHIFT INDICATOR PATTERN.
If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.

METHOD FOR ADJUSTMENT WITH 4WD SHIFT SWITCH AT 4H OR 4LO
1. Start engine. (Stay for at least 10 seconds)
2. Stop vehicle and move A/T selector lever to N position with brake pedal depressed. (Stay for at least 2 seconds.)
3. Turn 4WD shift switch to 2WD position. (Stay for at least 2 seconds.)
4. Turn ignition switch OFF.
5. Start engine.
6. Erase self-diagnosis. Refer to How to erase self-diagnostic results (with CONSULT-II) or ERASE SELF-DIAGNOSIS (without CONSULT-II).
7. Check 4WD shift indicator lamp and 4LO indicator lamp again. Refer to CHECK 4WD SHIFT INDICATOR PATTERN.
If 4WD shift indicator lamp and 4LO indicator lamp do not indicate proper pattern, install new transfer control unit and retry the above check.