Camshaft Bearing

Camshaft Bearing





Tighten the camshaft bracket bolts as follows:
Camshaft bracket bolts
Step 1 (bolts 9 - 12) 1.96 Nm (0.2 kg-m, 17 inch lbs.)
Step 2 (bolts 1 - 8) 1.96 Nm (0.2 kg-m, 17 inch lbs.)
Step 3 (all bolts) 5.88 Nm (0.6 kg-m, 52 inch lbs.)
Step 4 (all bolts) 10.4 Nm (1.1 kg-m, 92 inch lbs.)

CAUTION: After tightening the camshaft bracket bolts, be sure to wipe off excessive liquid gasket from the parts listed.
^ Mating surface of rocker cover
^ Mating surface of front cover





Tighten front cover bolts (4 for each bank) as shown to the specified torque.
Front cover bolts 11.0 Nm (1.1 kg-m, 8 ft. lbs.)