Front Drive Shaft
Disassembly and AssemblyDISASSEMBLY
1. Remove the front bearing, using Tools.
Tool number
A: ST35300000 ( - )
B: ST30021000 (J-22912-01)
2. Remove the rear bearing, using Tools.
Tool number
A: ST33710000 ( - )
B: ST30021000 (J-22912-01)
INSPECTION AFTER DISASSEMBLY
Front drive shaft
Check items below. If necessary, replace them with new ones.
^ Damage, peeling, dent, uneven wear and bending of shaft.
^ Excessive wear, damage and peeling of gear.
Bearing
Check the bearing for damage and rough rotation. If necessary, replace it with a new one.
ASSEMBLY
1. Install the rear bearing, using Tools.
Tool number
A: KV38100500 ( - )
B: ST30901000 (J-26010-01)
2. Install the front bearing, using Tools.
Tool number
A: KV38100500 ( - )
B: ST30901000 (J-26010-01)